

Here is a Clydesdale fireplace insert installed into a masonry fireplace
Here are a series of photos that could give you some
ideas of what can be done to change an existing fireplace.
A complete renovation with one, easy-to-install step… Every Stoll ReFace™ is unique; engineered to completely cover your wood or gas manufactured fireplace by custom-sizing the frame and the louvers to fit perfectly. You can design your own unique ReFace from our selection of styles, colors, finishes and options. The result will be a complete make-over that suits your taste and fits your fireplace perfectly.



Old Vermont Castings Wood Stove replaced with a Jotul Firelight Gas Stove
The direct vent gas stove uses the wood burning flue retrofitted with a flue liner


Direct Vent Gas Insert in a factory built fireplace
Here is a before and after photo of a Kozy Heat Chaska direct vent gas insert put into a prefab fireplace


Fireplace Makeover with a Direct Vent Gas Insert
This was a Heatilator wood burning fireplace with a gas log, the mantel was painted, the floor of the fireplace was modified for a Kozy Heat direct vent gas insert to be put in the opening. Great job Ashley Umphrey!




Kozy Heat Z-42 Hi Efficiency Fireplace in a Chalet in Insbrook Missouri


See Thru Arched Fireplace with new Stoll Blacksmith Doors on each side. The doors were manufactured to be inside the opening fit doors. First a template was made of the arched opening and then a frame was manufactured for the doors to bolt to.


Arched Fireplace with a Fireplace Insert
Yes, you can put a wood burning insert in an arch fireplace. I think it looks pretty good.


Tear out a Prefab Fireplace and Replace with a Direct Vent Gas Fireplace
This job was all done from the backside without disturbing the brick façade inside. The Kozy Heat gas fireplace was a close fit to the original opening and only some small filler panels were needed.
Zero Clearance Fireplace Reface Doors
A complete fireplace renovation in one, easy-to-install step.


The reface door shown here has a arch window pane design and the finish is Bronzed Iron. These doors can be custom made in any size and finish to match your existing fireplace. Every reface door is unique: specially made for each fireplace by custom-sizing the frame and louvers to fit perfectly. The rare earth magnets allow the frame to attach firmly and easily. Transform your “black box” into a showpiece!


Stoll Heat Champion installed in a full masonry fireplace
Stoll Heat Champion installed in full masonry fireplace. This “hybrid” combines a custom glass door and a heat exchanger with a blower creating a fireplace of beauty and efficiency. This unit requires no modification to the fireplace and no liner for the chimney!

Here is a typical 1970s – 1980s inefficient prefab fireplace with an antique brass door. The customer considered replacing the glass door with a modern insert in the existing opening.

After weighing the options, the decision was made to totally remove the entire fireplace, flue pipe, brick and mantel and replace it with a new modern design in the same opening. Shown here is the completed project, with a new Lennox
Montecito high efficiency fireplace, a new Pearl Classique Mantel and new tile.



















